Subdivision

Concept Plan

7-SG-03-C

Recommended for approval
by the Planning Commission

APPROVE variances 1-6 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 9 conditions


See case notes below

Details

Request

Property Info

Case Notes

What's next?

Details of Action

+
1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works.
2. Certification on the final plat by the applicant's engineer that there is 300' of sight distance in both directions at the subdivision entrance looking on to Duncan and Schriver Rds..
3. Compaction or fill areas to be done in accordance with the requirements of the Knox County Dept. of Engineering and Public Works.
4. Place a note on the final plat that all lots except lot 26 will have access from the internal street system only.
5. Meeting all requirements of the approved use on review development plan.
6. Connection to sanitary sewer and meeting any other relevant requirement of the Knox County Health Dept.
7. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (Ord. 91-1-102).
8. Submitting a survey of the site showing 18.5 acres or greater after the dedication of the required right-of-way or reduce the number of lots to comply with the recommended zoning density.
9. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.

Applicant Request

+
Subdivision
Duncan Woods
Lots
37 (Split)
Proposed Density
2.0 du/ac

Variances

1. Grade at intersection from 1% to 3% on Road A at Duncan Rd.
2. Grade at intersection from 1% to 3% on Road B at Road A.
3. Vertical curve variance from 337.5 to 300' at sta. 2+25 of Road A.
4. Vertical curve variance from 105' to 90' at sta. 0+50 of Road B.
5. Vertical curve variance from 165' to 124' at sta. 0+75 of Road C
6. Variance of intersection separation from 300' to 280' from proposed entrance to Schriver Rd.


Property Information

+
Location
East side of Duncan Rd., East side of Schriver Rd.

Commission District 4


Size
18.50 acres

Sector
Southwest County

Currently on the Property
Single family residence and vacant land

Growth Plan
Rural Area

Case Notes

+
Staff Recommendation
APPROVE variances 1-6 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 9 conditions

1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works.
2. Certification on the final plat by the applicant's engineer that there is 300' of sight distance in both directions at the subdivision entrance looking on to Duncan and Schriver Rds..
3. Compaction or fill areas to be done in accordance with the requirements of the Knox County Dept. of Engineering and Public Works.
4. Place a note on the final plat that all lots except lot 26 will have access from the internal street system only.
5. Meeting all requirements of the approved use on review development plan.
6. Connection to sanitary sewer and meeting any other relevant requirement of the Knox County Health Dept.
7. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (Ord. 91-1-102).
8. Submitting a survey of the site showing 18.5 acres or greater after the dedication of the required right-of-way or reduce the number of lots to comply with the recommended zoning density.
9. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.
Disposition Summary
APPROVE variances 1-6 because the site's topography restricts compliance with the Subdivision Regulations, and the proposed variances will not create a traffic hazard

APPROVE the concept plan subject to 9 conditions

Details of Action
1. Meeting all applicable requirements of the Knox County Dept. of Engineering and Public Works.
2. Certification on the final plat by the applicant's engineer that there is 300' of sight distance in both directions at the subdivision entrance looking on to Duncan and Schriver Rds..
3. Compaction or fill areas to be done in accordance with the requirements of the Knox County Dept. of Engineering and Public Works.
4. Place a note on the final plat that all lots except lot 26 will have access from the internal street system only.
5. Meeting all requirements of the approved use on review development plan.
6. Connection to sanitary sewer and meeting any other relevant requirement of the Knox County Health Dept.
7. Provision of street names which are consistent with the Uniform Street Naming and Addressing System within Knox County (Ord. 91-1-102).
8. Submitting a survey of the site showing 18.5 acres or greater after the dedication of the required right-of-way or reduce the number of lots to comply with the recommended zoning density.
9. A final plat based on this concept plan will not be accepted for review by MPC until certification of design plan has been submitted to MPC staff.

What's next?

+
After the Planning CommissionAppeals of Concept Plans and Final Plats are filed with Chancery CourtThe Process
Applicant

Duncan Woods

S & E Properties


Case History