Below is the monthly archive for the October 2021 Design Review Board meeting, including the agenda, meeting minutes, and the recording of the meeting.
Agenda Minutes VideoAPPROVE Certificate 10-B-21-DT, subject to meeting all relevant provisions of the City Sign Code.
APPROVE Certificate 10-B-21-IH, subject to the following conditions:
1) Final site plan and parking to meet City Engineering standards;
2) Confirm foundation height reflects heights of historic houses on the block;
3) Modifications to the porch, including increasing to 8' deep and using 8" by 8" supports;
4) Additional window to be added to left elevation, along with appropriately-sized window trim on all windows;
5) Modify porch or house roofline to better reflect complexity of historic house forms on block;
6) Final site plan should incorporate a native or naturalized shade tree in both front and rear yards.
APPROVE Certificate 10-C-21-IH, with the following conditions:
1) Parking to meet City Engineering standards;
2) Modify side setbacks, with final site plan approval by staff;
3) Elevate foundation height to between 1' and 18";
4) Use a lap siding with an overlap, instead of Dutch lap or flush panels.
APPROVE Certificate 10-D-21-IH, with the following conditions:
1) Final site plan to meet City Engineering standards;
2) Use lap siding with an overlap instead of Dutch lap or flush panel siding.
APPROVE Certficate 10-E-21-IH, with the following conditions:
1) Final site plan to meet City Engineering standards;
2) Incorporate additional foundation height (1' or taller);
3) Use one-over-one windows with appropriately-sized trim;
4) Add one or two windows to the left elevation, with approval by staff;
5) Use lap siding with an overlap instead of Dutch lap or flush panel siding.
APPROVE Certificate 10-E-21-IH, with the following conditions:
1) Final site plan to meet City Engineering standards;
2) Incorporate raised foundation (1' or taller) instead of concrete slab;
3) Use lap siding with an overlap instead of Dutch lap or flush panel siding.
APPROVE Certificate 10-B-21-IH, subject to the following conditions:
1) Final site plan and parking to meet City Engineering standards;
2) Confirm foundation height reflects heights of historic houses on the block;
3) Modifications to the porch, including increasing to 8' deep and using 8" by 8" supports;
4) Additional window to be added to left elevation, along with appropriately-sized window trim on all windows;
5) Modify porch or house roofline to better reflect complexity of historic house forms on block;
6) Final site plan should incorporate a native or naturalized shade tree in both front and rear yards.
APPROVE Certificate 10-C-21-IH, with the following conditions:
1) Parking to meet City Engineering standards;
2) Modify side setbacks, with final site plan approval by staff;
3) Elevate foundation height to between 1' and 18";
4) Use a lap siding with an overlap, instead of Dutch lap or flush panels.
APPROVE Certificate 10-D-21-IH, with the following conditions:
1) Final site plan to meet City Engineering standards;
2) Use lap siding with an overlap instead of Dutch lap or flush panel siding.
APPROVE Certficate 10-E-21-IH, with the following conditions:
1) Final site plan to meet City Engineering standards;
2) Incorporate additional foundation height (1' or taller);
3) Use one-over-one windows with appropriately-sized trim;
4) Add one or two windows to the left elevation, with approval by staff;
5) Use lap siding with an overlap instead of Dutch lap or flush panel siding.
APPROVE Certificate 10-E-21-IH, with the following conditions:
1) Final site plan to meet City Engineering standards;
2) Incorporate raised foundation (1' or taller) instead of concrete slab;
3) Use lap siding with an overlap instead of Dutch lap or flush panel siding.